DRL Type Mechanical Seals
Justifying our position, as one of the leading names to manufacture quality products, we also offer
DRL type mechanical seals. Designed as per international quality standards, these seals have the
following specifications:
· Models: DRL8, DRL10, DRL12, DRL14, DRL16(054), DRL16(Standard), DRL18.5,
DRL19, DRL25, DRL28 & DRL32
· Sizes: 8mm to 32mm
· Temperature: 50oC to 200oC
· Pressure: upto 100 pounds/square inch
· Shaft Speed: upto 15000 fpm
| These seals are widely used in water pumps, chemical pumps, steam boilers and marine products |
| NO |
Part Name |
Material |
| 1 |
Cup Gasket |
Nitrile Butadine Rubber |
| 2 |
MatingRing |
Ceramic |
| 3 |
Seal ring |
Carbon |
| 4 |
Rubber Bellows |
Nitrile Butadine Rubber |
| 5 |
Spring Holder |
Stainless Steel |
| 6 |
Coil Spring |
Stainless Steel |
| No |
Type |
Shaft Size (MM) |
Length OF Seal (MM) |
outer Diameter of seal(MM) |
| 1 |
DRL8 |
8 |
20.00 |
20.00 |
| 2 |
DRl10 |
10 |
23.00 |
25.70 |
| 3 |
DRL12 |
12 |
23.50 |
25.70 |
| 4 |
DRL14 |
14 |
25.50 |
30.00 |
| 5 |
DRL16(std) |
16 |
27.50 |
32.00 |
| 6 |
DRL16(054) |
16 |
25.50 |
30.00 |
| 7 |
DRL18.5 |
18.50 |
29.00 |
37.00 |
| Material construction |
| Part Name |
Material |
| Cup Gasket |
Nitrile Butadiene Rubber |
| Staionary Face |
Ceramic |
| Seal face |
carbon |
| washer |
Stainless steel |
| Rubber Bellows |
Nitrile Butadiene Rubber |
| Coil Spring Outer Shell |
Stainless steel |
| Outer shell |
Stainless steel |
| Drive ring |
Nitrile Butadiene Rubber |
| Special Material |
Size(mm) |
Speciality |
| Vilton |
16,19,22&25 |
Resistance to hydrocarbon Fuels, Acids and Dampness up to 150oC |
| Tungsten-Carbide |
19,25&32 |
Resistance to slurry, Turbid Water, Heat, Abrasion and Alkalies |
| Size |
| RC(Open Type) |
Shaft Size(mm) |
Length of Seal(mm) |
Outer Diameter of Seal(mm) |
| RC16(Std) |
16 |
32.00 |
32.00 |
| RC16 |
16 |
28.50 |
30.00 |
| RC19(S) |
19 |
32.50 |
35.00 |
| RC19(T) |
19 |
32.50 |
37.00 |
| RC25 |
25 |
35.00 |
41.50 |
|
